Get a quotation

Home › Guides › Substation

Substation

What a PFI plant does, and why your bill needs one

Power factor explained without the maths, and how a PFI plant removes the penalty.

Motors, lifts and air conditioners draw two kinds of power: the real power that does the work, and reactive power that only magnetises their coils. Power factor is the share of the total that is real. A building full of motors can run at 0.7 or 0.8.

Why it costs you

Low power factor means more current for the same work. Your cables and transformer run hotter, and the utility adds a surcharge to your bill when your power factor falls below its limit.

What the plant does

A power factor improvement (PFI) plant is a panel of capacitors switched in and out by contactors. A controller watches your power factor and adds exactly the capacitance needed to hold it close to 1.

Sizing

The plant is sized in kVAr from your load and present power factor. As a first estimate, plants are often sized at around 60% of the transformer's kVA rating; we confirm the figure from your actual load.

Want this done for your building?Get a quotationWhatsApp

Read next